China Geran focuses on high-end metal furniture feet, metal furniture legs and the best furniture accessories design and production, including: Luxury metal coffee table legs, metal coffee chair legs, metal coffee table legs, metal table legs, metal desk backs, Solid metal sofa legs, metal sofas Legs and so on. We are an excellent enterprise and reliable supplier of customized metal furniture legs in China. The editor of Geran collects and organizes the methods of linking table legs today to share with you.
Our furniture feet can be used for dining tables, desks, coffee tables, kitchen counters and islands, sinks, coffee tables, benches, etc. Among these furniture and furniture legs, there are metal (metal furniture legs) and wood. When you buy a table leg from us, you can choose from the most suitable accessory options for that leg.
You can easily fix the table legs through the following 8 methods:
1. Right Angle Metal Plate
Fix the metal plate to the bottom side of the furniture with 4 screws (included). A bolt was installed halfway through the leg, and the remaining 5/16 inch of exposed thread was screwed into the metal plate. The feet can be easily twisted for storage and transportation. A quick, easy and inexpensive solution, very suitable for light applications. Can be used for straight and angled attachments.
is recommended for:
A small table without apron, especially in the Middle Ages
Easy, fast and cheap installation
The thinner feet are connected to a solid or dense wooden base
An invisible way to fix the feet-after installation, you will see the script body
bevel or right angle attachment
is not recommended for:
Heavy load bearing
Furniture that often moves or slides on the floor
metal or cork base furniture
Feet with a diameter of 2.25 inches or larger
dining table or kitchen island
How to order: https://www.gelanfurnitureleg.com/, mail:gelanfurniture@163.com,TEL: +86 13480550448
2. Threaded insert
Threaded blade requires a little carpentry skill. They are installed directly on the underside of the furniture and can be installed on any table legs with 3/8-inch wide insert bolts. Then you can easily twist the feet for storage and transportation. Rugged, invisible solutions are sufficient for most applications.
is recommended for:
feet connected to the wooden base
A table without apron-a way to hide the legs of the table
A table that often moves or slides on the floor
Experienced woodworking
is not recommended for:
table with metal base
table with apron
How to order:
China European metal table legs, https://www.gelanfurnitureleg.com/, mail:gelanfurniture@163.com,TEL: +86 13480550448
3. Installation block
Fixing blocks are a good way to fix the feet on the table without an apron. They are fixed on the bottom side of the furniture with 4 screws (included). Install the 3/8" x 2½" bolt part into the foot, and screw the remaining ¾" exposed thread into the mounting block. The block has a clear beveled edge to make the appearance more attractive. You can easily screw the foot to For storage and transportation. A fast and simple apron-free table solution that is powerful enough for almost all applications. 7 types of wood and 2 sizes of mounting blocks are provided.
is recommended for:
table without apron
Easy and quick installation
feet connected to the wooden base
Heavy load bearing
Furniture that often moves or slides on the floor
Foursquare or any round legs
is not recommended for:
Metal bottom furniture
Apps that you want the accessory hardware to be invisible
table with apron
Traditional leg turning design
How to order:
When you purchase any foot where feasible, the mounting block is provided as an optional accessory service. China's excellent supplier of metal table legs and metal chair legs https://www.gelanfurnitureleg.com/, mail:gelanfurniture@163.com,TEL: +86 13480550448
4. Right angle splint
The development of cleats is an eye-catching sturdy method for fixing mid-century modern outriggers on the table without using an apron. The cleats (there are 8 lengths from 12 inches to 36 inches) are fixed on the bottom side of the furniture with the attached screws. There is a leg at each end of the leg guard. 1 cleat, two legs. The cleat is installed in the middle of the leg, and the remaining 3/4 inch of exposed thread is screwed into the cleat. The feet can be easily twisted for storage and transportation. Quick and easy solution, powerful enough for any application. Choose straight cleats or angled (spread) cleats for a classic medieval style.
is recommended for:
McCobb and Wegner legs have a maximum diameter of 2.375 inches
Easy and quick installation
feet connected to the wooden base
Heavy load bearing
Furniture that often moves or slides on the floor
Authentic mid-century modern appearance, especially with slanted cleats
is not recommended for:
Metal bottom furniture
Apps that you want the accessory hardware to be invisible
Feet with a diameter greater than 2.375 inches
The table is longer than 44 inches or longer than 70 inches
5. Single-angle cleats
Single angle cleats were created specifically to complement our McCobb and Wegner legs and our inclined cleats. They are fastened to the underside of the furniture using the screws provided. Install the 3/8" x 2½" bolt part into the leg, and screw the remaining ¾" exposed thread into the cleat. The foot can be easily screwed for storage and transportation. A quick and easy solution, very suitable for three Leg tables or six-leg benches with angled non-slip pads or mid-leg supports on the table.
is recommended for:
McCobb and Wegner's legs
three-leg table
Easy and quick installation
is not recommended for:
Metal bottom furniture
Apps that you want the accessory hardware to be invisible
How to order:
Metal furniture fittings factory supplier Ou Ye https://www.gelanfurnitureleg.com/, mail:gelanfurniture@163.com,TEL: +86 13480550448
6. Proprietary
In order to replace traditional joinery faster, easier and equally powerful, we will bring mortises and mortises into the 21st century. This ingenious system does not require the use of glue and fixtures, but relies on corner blocks and bolts. All you have to do is to slide the outriggers into place and use the included Allen key to rotate it a few times. It can be easily disassembled for transportation and storage.
is recommended for:
any size table-small to large
Carpenters and DIY workers with various skills
Robust installation
table with apron
Furniture that often moves between rooms
6.leg table
is not recommended for:
Those who like no aprons
Stick to the traditional woodworking with glue, jigs and nails
How to order:
Almost all of our table legs can be purchased with aprons as table legs or whole tables. Professional manufacturer supplier of metal furniture accessories bed legs and sofa legs https://www.gelanfurnitureleg.com/, mail:gelanfurniture@163.com,TEL: +86 13480550448
7. Direct attachment
The metal feet can be fixed without additional parts or services-they can be fixed directly to the bottom of the furniture using the attached screws. Heavier metal feet (such as our industrial metal cone feet) are suitable for larger, heavier tables. Hairpin legs are more suitable for smaller, lighter tables.
is recommended for:
contemporary design
Easy and quick installation
feet connected to the wooden base
Heavy-duty bearings (except hairpins)
A way to hide your legs
Furniture that often moves or slides on the floor
is not recommended for:
Metal bottom furniture
table with apron
How to order:
here https://www.gelanfurnitureleg.com/ view all our metal furniture legs
8. Traditional mortise woodworking
Traditional mortises and time-tested traditional methods of making sturdy furniture. The apron-a long plank with tenon cut at both ends-interlocks with the mortise inserted in the leg. They are glued together. Recommended for experienced woodworkers, because wood glue, jigs and nails require additional tools and higher skill levels. The table cannot be disassembled. Tenon carpentry
is recommended for:
any size table-small to large
Experienced woodworkers and DIY workers, especially those who are passionate about traditional joinery
Robust installation
Stretcher base table
table with apron
is not recommended for:
Beginner and intermediate carpenter and DIYer.
Furniture that is often moved or disassembled for storage
If you are interested in these products and information in this regard, we look forward to your letters, calls for communication, consultation, custom metal furniture frames and metal furniture feet, etc. We will serve you in the way of factory direct sales!
Gelan Metal Sofa Leg Homepage: https://www.gelanfurnitureleg.com/, mail:gelanfurniture@163.com,TEL: +86 13480550448
Searches related to furniture legs sofa:
Read more news
Post time: Aug-19-2021
